Motor configuration properties
| Rotational speed | 8 rpm |
|---|---|
| Torque | 907Ncm |
| Power | 7.59 W |
| warning notice | The displayed output torque corresponds to the peak torque of the gearbox. Operating the engine configuration above peak torque can result in the failure of the transmission. |
| Supply Voltage | 1~24 V |
| Frequency | 50Hz |
| Total current | 1000mA |
| Input power | 24 w |
| Capacitor | 60uF |
| Coil overtemperature | 85ºC |
| Rotational speed solo motor | 1000 rpm |
| Torque solo motor | 11Ncm |
| self-holding torque | 1.3Ncm |
| Gear | Spur gear type W |
| Gear ratio | 125:1 |
| Gear efficiency | 0.66 |
| Permissible output torque | 8Nm |
| allowable peak torque | 13Nm |
| Output shaft diameter | 12mm g7 |
| Max. axial load | 40N |
| Max. radial load | 180 N |
| Overall length without integrated electronics | 115mm |
| Overall length with integrated electronics | 159mm |
| Gear type | Spur Gear |
| electronics | Standard without control electronics. |
Engine configuration properties
ROBASE 46.0-W125
| Rotational speed | 8 rpm |
|---|---|
| Torque | 907Ncm |
| Power | 7.59 W |
| warning notice | The displayed output torque corresponds to the peak torque of the gearbox. Operating the engine configuration above peak torque can result in the failure of the transmission. |
| Supply Voltage | 1~24 V |
| Frequency | 50Hz |
| Total current | 1000mA |
| Input power | 24 w |
| Capacitor | 60uF |
| Coil overtemperature | 85ºC |
| Rotational speed solo motor | 1000 rpm |
| Torque solo motor | 11Ncm |
| self-holding torque | 1.3Ncm |
| Gear | Spur gear type W |
| Gear ratio | 125:1 |
| Gear efficiency | 0.66 |
| Permissible output torque | 8Nm |
| allowable peak torque | 13Nm |
| Output shaft diameter | 12mm g7 |
| Max. axial load | 40N |
| Max. radial load | 180 N |
| Overall length without integrated electronics | 115mm |
| Overall length with integrated electronics | 159mm |
| Gear type | Spur Gear |
| electronics | Standard without control electronics. |
Download 3D model
The offered CAD model is a standard configuration. On request we will find individual solutions for your application.
Print data sheet
You can print out the motor configuration data by clicking the button below.